• starman2112@sh.itjust.works
    link
    fedilink
    English
    arrow-up
    1
    ·
    12 days ago

    Further advice, don’t use a lot of it. You’ll see videos on youtube of people pouring like three cups of vinegar in their washing machine, don’t do that. You only need a splash of it. If you use too much, the acid will eat away at the rubber gaskets and shit

    • mycelium underground@lemmy.world
      link
      fedilink
      English
      arrow-up
      1
      ·
      12 days ago

      You definitely don’t need that much vinigar. That said most new washing machine are using a chemical resistant silicone or TPE instead of more traditional rubber compound. This eliminated the already miniscule risk of acid damaging the seals.

      If you add 3 cups(about 700 mL) of standard 5% acetic acid bleach to 4 gallons of water(~ 15000 mL) you end up with a 0.2% acetic acid you will end up with a pH of something like 5.5 or about the pH of healthy skin. A lot of HE washers will use a 5 gallon initial wash so it’s likely to be even gentler than what I came up with in my rough napkin math guesstamate.

      • anguo@lemmy.ca
        link
        fedilink
        English
        arrow-up
        1
        ·
        12 days ago

        While I agree with the general sentiment, the vinegar won’t be released and diluted until later in the load, so it sits in its full 5% acetic acid glory for quite a while.